




Couldn't load pickup availability
The DiFluid CoffMeter M1 Moisture and Density Meter is a handheld tool for measuring green and roasted coffee in seconds rather than sending samples off to a lab. It reads moisture, density and sample temperature in a single test that takes two seconds or less, giving roasters and green buyers a number they can act on immediately instead of waiting on an oven-based moisture test.
Moisture reads across a 1-50% range at ±0.2% accuracy and density covers 0-1200g/L at ±1g/L, both measured from the same sample without switching instruments. It handles green beans, roasted beans, parchment and dried cherries, so one device covers sourcing, roasting and cupping. Calibration runs entirely on firmware, so there's no physical reference sample to buy or run out of.
At 445g and running on a 2500mAh battery, the M1 is built to move between the warehouse floor, the roastery and the cupping table rather than stay bolted to a bench. A full charge takes around four hours over USB-C and lasts roughly ten hours of continuous testing and it pairs over Bluetooth to store the last 500 readings in DiFluid's companion app.
Simultaneous Moisture, Density and Temperature - Reads all three from the same sample in two seconds or less.
±0.2% Moisture Accuracy - Reads across a 1-50% moisture range with lab-grade precision.
±1g/L Density Accuracy - Covers a 0-1200g/L density range at 1g/L resolution.
Multiple Sample Types - Tests green beans, roasted beans, parchment and dried cherries with the same device.
Firmware-Based Calibration - No physical reference material required, so there's nothing to run out of or repurchase.
Bluetooth App Connectivity - Pairs with DiFluid's companion app to store and sync the last 500 readings.
Portable, Battery-Powered Design - At 445g with a 2500mAh battery, it moves between the warehouse, roastery and cupping table.
| Model | CM-M101 |
| Moisture Range | 1 - 50% |
| Moisture Accuracy | ±0.2% |
| Moisture Resolution | 0.1% |
| Density Range | 0 - 1200 g/L |
| Density Accuracy | ±1 g/L |
| Density Resolution | 1 g/L |
| Testing Time | ≤2 seconds (moisture and density) |
| Sample Types | Green Beans, Roasted Beans, Parchment, Dried Cherries |
| Display | 2.31" Touchscreen |
| Charging | USB-C, ~4 hours full charge |
| Connectivity | Bluetooth. CoffeeOS Coming Soon |
| Weight | 445g |
| Dimensions | (H) 83.7mm x (D) 135mm x (W) 83mm |
| Warranty | 12 Months* |
Thanks for subscribing!
This email has been registered!